Purpose:

Measuring flow rates of oil and condensate wells with high gas content.

System Operation Principle:

The multiphase flow is separated into gas and liquid in an in-pipe separator. A standard gas flow meter is installed on the gas line, while a standard mass flow meter and moisture meter are installed on the liquid line to determine the water content in the oil.
After the flow meters, gas and liquid are mixed in a mixer and fed into the gathering pipeline.
The system is installed either directly at each well or at well clusters.
It is designed in a mobile configuration for rapid transportation between locations.

Dependence on Imported Components:

Completely independent

▸ Gas: 8,000 to 800,000 std. m³/day
▸ Liquid: 21 to 800 tons/day
▸ Operating pressure: 1.0–6.3 MPa

▸ Mobility
▸ Stabilization efficiency 20% higher than traditional traps
▸ Low CAPEX and OPEX
▸ No need for pile foundations

Application Experience:

Successful pilot testing at YARGEO LLC (NOVATEK) for paraffinic oils with high gas content (over 1,000);

Metrological certificates available;

Ready for serial production.